Pin and Wire Systems

On older buildings or where the most discreet bird deterrent system is required to protect sills and ledges, pin and wire systems are the most appropriate. A series of stainless steel pins are attached to the ledge, either by being drilled into the stone using a 6mm rivet or by being glued using a purpose made base. Between the pins 0.8mm stainless steel wires are sprung. The sprung wires are set up in rows depending on the width of the ledge.

Call us on 01728 638110

Pin and Wire Specification

• Pin heights 90mm-130mm-150mm
• Distance between the rows 75mm
• Suitable for pigeons and gulls
• Suitable for ledge and sill protection